PB 10 XL
It uses our strongest motors and has 30% more printing area than our standard size model, allowing for even more creative designs.
The PB 10 XL ceramic 3D printer can print vessels up to 28" (71cm) high. The 10 XL has the largest extruder out of all of our printers, holding 18 pounds of clay. This lets you print more and reload less. With a 4000ml extruder, you can print dozens of objects and still have clay left over.
Specifications
Printing Envelope:
X-19.3" (490 mm)
Y-19.3" (490 mm)
Z-28" (710 mm)
Printer size:
W-32” L-40” H-47”
Normal operation space needed 3600ml: W-32” L-40” H-82”
Normal operation space needed 4000ml: W-32” L-40” H-85”
Maximum operation space needed: W-35” L-42” H-89”
Print Bed 15x15in” (381x381mm)
Height with the extruder fully extended is 89” (2260mm)
Weight with extruder: 60 lbs.
Recommended print speed: 0.4”/s’ to 7.9’’/s (10 to 200 mm/s)
Maximum print speed: 7.9in”/s (200mm/s)
Power Supply: Output - 24V 10 amps, Input - 100-240V, 50-60 Hertz.
Power consumption: 24V ~6 amps, ~144 Watts
Main controller board running Duet3D with Atmel SAM4E8E: 120MHz ARM Cortex-M4
Full control through the web interface, no apps or software installation.
What's included:
1. 3D PotterBot 10 XL
2. Closed loop stepper on X, Y, Z, extruder
3. 3600ml or 4000ml extruder, 2 tubes and anti-Rotator
4. Anodized aluminum print nozzles (in sizes: 3, 4, 5, and 6mm)
5. Parts Box: Alan key set, grease, Acme driver tool
6. Power Supply
7. Wall mount bracket